Get Free Products To Test Now >> | Free Shipping on Orders over $30
A transfer is made up of a carrier paper and inks. When heated to a certain temperature and pressed with a significant amount of pressure for a certain amount of time, the transfer inks are passed over to the imprintable material. Some inks are adhered and embedded to the surface of the material, while others (namely, sublimation) permeate the coating of the material.
The temperature may fluctuate briefly when placed on the base material after heating. This is due to the difference in temperature of the heated plate and the base material. The temperature will return to your selected level in a few seconds. This is a normal phenomenon, please rest assured use.
OFFNOVA Heat Press Machine offers Fahrenheit/Celsius Option. The temperature range of our machine is 100~205℃/ 210~400℉. It's probably that you accidentally change to the Celsius unit, so you're not able to set the temperature above 205 degrees. Please change to Fahrenheit unit and have another try.
You can use the alcohol to clean the bottom of the heat press.
It is recommended that you just go back over it and do a little bit more, like applying more pressure on it and pressing for a little bit longer. Please note that each rework will be better no more than 10 sec then you need to check the result first and decide if to continue.
Please check our Guide Card to make the right setting:
Yes you can do it in sections, using a heat press mat to block the part that exceeds 9"x9" and transfer the whole image in steps.
Actually mini Heat Press Machine can work. It is recommended that you put the parchment paper over the surface to give a little added protection. Then you do constant movement for around 30-40 sec under 355 ℉.
It records the version of the machine and no actual usages for customers.
Once you register successfully on our website, you will get a one-year warranty. Please register here.