Your Cart

DTF Glitter Transfer Film Sheet (A3)



- +



banner banner

Print out your design on the DTF film via a DTF printer. *Set up the image with 300 resolution at least, the higher resolution the clearer design you get.


Cover the well-printed film with DTF powder, which ensures the glue powder sticks to the pattern evenly.


Put the DTF film into the oven to bake, with the temperature between 266℉-302℉, and the baking time 60-120 seconds. This way, the rubber powder will be melted, and the pattern will not crack. Tips: if you don't have an oven, a heat press machine can also help melt the powder.


Put the DTF film on the fabric, apply heat & pressure with the heat press machine (temperature: 284℉-320℉, time: 12s-15s), then the patterns can be 100% transferred on fabric.

How does a DTF powder curing oven work?

A Direct to Film Powder Curing Oven works by using heat to melt and cure the powder coating onto the product. The oven heats up the product and the powder coating to a specific temperature, causing the powder to melt and flow onto the product's surface. The powder then cures into a hard, durable finish.

What is the purpose of the DTF curing oven? If you have a heat press is the oven necessary?
What happens if I cure the print for longer than usual? Does it damage the print?
My oven won't heat up to the proper temperature. What can I do?
Is it okay if the film is a little crooked when placed in the oven?
Is the oven heat panel at 302℉ or is the print surface supposed to be at 302℉? Also, what's the height between the heat panel and the film?
Can I put in a stack of film all at once?
What is the warranty policy?

You May Also Like